CY8CKIT-021: Using the BLEIOT Component

// Project: Example9b-PSoC-BLEIOT-Test
// Kit: CY8CKIT-021 Sheild
// Baseboard: CY8CKit-44 PSoC4M
//
// This project demonstrates using the BLEIOT component
// If the other side writes the LED then update it
// If the user presses button 0 then send an bootload command
// If the user presses button 1 then send an update to the button
 
#include <project.h>
 
int main()
{
    CyGlobalIntEnable; 
    CapSense_Start();
    CapSense_InitializeEnabledBaselines();
    CapSense_ScanEnabledWidgets();
 
    BLEIOT_Start();
 
    for(;;)
    {
        if(!CapSense_IsBusy())
        {
            uint8 b0 = CapSense_CheckIsWidgetActive(CapSense_BUTTON0__BTN);
            uint8 b1 = CapSense_CheckIsWidgetActive(CapSense_BUTTON1__BTN);
 
            if(b0)
                BLEIOT_updateBootload(1); // send the bootload command
 
            if(b1 != BLEIOT_local.button1) // if the button state has changed send it
                BLEIOT_updateButton1(b1);
 
            CapSense_UpdateEnabledBaselines();
            CapSense_ScanEnabledWidgets();
        }
 
        if(BLEIOT_getDirtyFlags() &amp; BLEIOT_FLAG_LED0) // other side wrote LED0, update state
        {
            BLEIOT_updateLed0(BLEIOT_local.led0); // update local state
            led0_Write(!BLEIOT_remote.led0); // the LED is active low
        }
    }
}
</project.h>

// Project: Example9b-PRoC-BLEIOT-Test
// Kit: CY8CKIT-021 Sheild
// Baseboard: CY8CKit-44 PSoC4M
//
// This project should be bootloaded into the PRoC.  It demonstrates using the BLEIOT
// component.
//
// Using the systick, send an update to led0 every 500ms
// If the other side writes to Bootload... then start the bootloader
// If the other side writes to the button1... then display that on the blue led
#include <project.h>
#include "BLEIOT_BLEIOT.h"
 
int countMs =0;
 
// This is the ISR for the systick
void sendLedUpdate()
{
    if(countMs++&lt;500) // count 500ms
        return;
    countMs = 0;
    BLEIOT_updateLed0(!BLEIOT_local.led0);
}
 
int main()
{
 
    CyGlobalIntEnable; 
    CyDelay(100);
    BLEIOT_Start();
 
    CySysTickStart(); // start the systick and register our call back
    CySysTickSetCallback(0,sendLedUpdate);
 
    for(;;)
    {
 
        if(BLEIOT_getDirtyFlags() &amp; BLEIOT_FLAG_BOOTLOAD)
            Bootloadable_Load();
 
        if(BLEIOT_getDirtyFlags() &amp; BLEIOT_FLAG_BUTTON1)
        {
            BLEIOT_updateButton1(BLEIOT_remote.button1);
            blue_Write(!BLEIOT_local.button1);
        }
    }
}
</project.h>