If you are not happy with the below results, you may try another search.
We have found some results with the word you searched.
Summary This article explains in detail how to use and debug SSD1306 displays. In this article, I use the Segger emWin library and MBEDOS, but for all practical purposes this discussion applies to all other interfaces to the board including Arduino, Raspberry Pi, Adafruit, etc. I will say from the outset that I spent far […]
Summary In this article I explain how to use a PSoC 6 SCB to implement I2C Detect. Recently, I wrote about using the Raspberry PI I2C bus master to talk to a PSoC 4 I2C Slave. In that project I used a program on the Raspberry Pi called “I2CDetect” which probes the I2C bus and […]
Summary In the last several articles I have written about how to use and talk to the Matrix Orbital GTT43A. Now it is time to write some code. The PSoC4 program that I am going to show you has evolved over time as I added stuff to it. For instance, while I was working on […]
Summary As I have been working my way through understanding the Matrix Orbital displays, I think that the whole scheme for programming them is very clever. The bottom line of this article is that Matrix Orbital created a command language for making things work in the display, then the built the rest of their toolset […]
Summary In this article I will show you how to interact with the Matrix Orbital GTT43A display using the GTT Support Tool via the KitProg UART on a CY8CKIT-044 and the Bridge Control Panel via I2C. This article will be broken up into four parts Building a Test Project in GTT Designer GTT Protocol 2.0 […]
