If you are not happy with the below results, you may try another search.
We have found some results with the word you searched.
In the next few posts I am going to show how to build a very simple BLE project for the shield, debug it using CySmart, make an iOS app, and finally make an Android app. I am going to try to only put in the bare minimum of feature that will enable you to see […]
Now that we have a component built up, I will build up a test to demonstrate its functionality. The test will do the following On the PSoC side it will: Read the Capsense Button0. If it is pressed it will send a “boatload” command to the PRoC Read the Capsense Button1. Each time it is […]
Now that I have shown you how to make all of the basic functions of the devkit work, I really want to make this shield into an IOT Device. In order to do this I need to: Get the bootloading to work (so I can put firmware into the PRoC) Have a scheme to communicate between […]
In the previous Elkhorn Creek posts I discussed the overall system architecture, the design of the Creek Board, and the design of CYPI. In this post I will focus on the software that is running on the Raspberry PI. The software is divided into two main pieces. The Backend Server The Java Server Pages GUI […]
In the previous post I discussed the process that I used to test the bootloader firmware. In this post I will walk you through testing the actual application firmware. As I started working on this post I decided to remind myself of the format of the EZI2C buffer. Here it is: The first thing that I […]
