If you are not happy with the below results, you may try another search.
We have found some results with the word you searched.
Now that I have shown you how to make all of the basic functions of the devkit work, I really want to make this shield into an IOT Device. In order to do this I need to: Get the bootloading to work (so I can put firmware into the PRoC) Have a scheme to communicate between […]
A bootloader is a firmware program that can update the application firmware in an embedded system without using a programmer (like the Miniprog-3). This is a convienient way to fix bugs, release features, etc. without having to be physically at the system. As a developer you can update your design, then create a “hex” file image, […]
In the previous four posts I talked about building an IOT device using the new CY8CKIT145. You might remember from the first post that my original objective in picking up the board was to try a new feature of PSoC Creator. Well, over the last few days I have been trying out that feature. Actually, it isn’t […]
In this post, I will take you through the PRoC BLE schematic and firmware. I describe a very similar version to this in great detail in the video you can find on the Cypress Video Training website. First, I create a new project in my workspace called “145capsenseled-ble.” Then, I add the UART component (the […]
In the previous post, I unboxed the CY8CKIT145 and showed you the schematics. In this post, I will show you how to build the CapSense firmware that runs on the PSoC4000S. The first decision I needed to make was how to connect the PSoC and the PRoC chips. So I looked at the back […]
